RGL-02
Application
- safety runway lamps (WIG WAG)
- located crossroads of taxiway with RWY
Files for download
pdf Data Sheet (2.45 MB)pdf Certifikát MO AČR (554 KB)
pdf Certificates LÚ SR (430 KB)
pdf Certificates MAК (1.46 MB)
Certificate basis
- ICAO-AERODROMES-ANNEX 14 VOLUME I, 3rd edition-1999
- FAA AC 150/5345-46 B
- MAK
Description/properties
- pair of elevated unidirectional lights fixed to the supporting console
- lights emit flashing yellow light of high luminous intensity
- special clamp attachment allows the console to supporting pipe and vertical and horizontal setting of lights
- horizontal setting of lifgts is carried out turning bearing pipes in the breacable coupling
- made of cast and pressing of Al alloys, glass pressing and switching components of stainless steel
- control management unit RGC-02.X, which interrupted power to the current light RGL-02 with the frequency from 45 up to 50 cycles per minute
- control unit RGC-02.X is watertight aluminium box with control circuit for alternate connection of the current in to lights and circuit evaluation of defective lamp
Construction
- frangible T-bar
- special sleeve (latching portion)
- complete of pipes along with breacable coupling
- reflector EL 217
Connection/supplying
- lights is powered from the serial or parallel distribution, according to the type of control unit
Technical parameters
- light RGL-02
- weight 4,6 kg
- dimensions
- optical height 600 mm
- horizontal pitch 381 mm
- adjustability
- horizontal 0°–360°
- vertical from 0°–20°
- control unit RGC-02.I
- weight 1,3 kg
- dimensions 160x100x80 mm
- powered from the constant current regulator via the airport serial power distribution system 6,6 A
- unit includes three pins with the connectors
- FAA L-823, two for lights and one for transformator
- control unit RGC-02.U
- weight 2,5 kg
- dimensions 160×160×90 mm
- powered via the parallel power distribution system 230 V AC
- unit includes four pins with the connectors
- FAA L-823, two for light and two for distribution system
- control unit LLC-01.RGC
- weight ~2,2 kg
- dimensions 160×185×90 mm
- module of system LMS
Electrical parameters
- insulation resistance 50 MΩ/1000 V DC
- electric strength 500 V/50 Hz/1 min.
Operating conditions
- level of protection IP 67
- climatic conditions ±55 °C
- resistance to wind and exhaust gases 482 km/h
- resistance to UV radiation
Source of light
- 2×halogen lamps 150 W/6,6 A with socket PK 30d
Accessories
- breakable coupling threaded 2“ NPSM type 001 061 + carrying AL tube 001 400/x (x = optical height)
- complete needles with socket type 002 1x3
- base plate 12“ with thread 2“ NPSM on concrete 002 660
- base plate 12“ with thread 2“ NPSM on substructure 002 661
- base plate 12“ with thread 2“ NPSM to substructures ADB 002 661 A
- substructures 12“ bottom outlet 002 560
