TLE27

Application

 

• LED high intensity elevated runway protection light (RGL)
• LED elevated light for holding position on runway (Road-Holding Position)

 

Files for download

tle271-en-.pdf

Application:

• LED high intensity elevated runway protection light (RGL)
• LED elevated light for holding position on runway (Road-Holding Position)

Accordance with:

• ICAO Annex 14, Vol. 1
• EASA CS-ADR-DSN
• IEC TS 61827
• FAA AC 150/5345-46E L-804(L)
• FAA EB No.67D
• TC TP312

Description/properties:

• comatible with existing infrastructure
• without distracting visual flickering
• operation with any CCR (Constant Current Regulator)
• designed in accordance with the requirements of IEC anf FAA
• significant reduction in CCR power consumption comapared to halogen bulbs
• excellent efficiency and color characteristics due to the use of LED technology
• two light sources are set in black front panel and equipped with separate shades
• to minimize the effect of sunlight and ensure high conrast during the ON/OFF cycle
• the light intensity is variable, same as for halogen bulbs as required by FAA EB No.67D

Technicla parameters:

• curent supply: 6.6 A or 2.2 A
• cover:IP67
• operating temperature:-55C to +55C
• storage temperature:-55 to +75
• service life: 110 000h under normal operating conditions
• flashing frequency: alternating flashes at a frequency of 45-50 flashes per minute
• surge protection: ANSI/IEE C62.41-1991, 1, cat. 2C, 10 kV / 5 kA (1.2/50μs - 8/20μs) EMC: IEC 61000-6-2 and IEC 61000-6-4
• vibration resistance: 20-2000 Hz with 2 G acceleration

Accessories:

• 001 427 - Al carrier pipe with breaking coupling (prooptical light height 490 mm)
• 002 113, 002 123, 002 133 – mounting needle
• 002 660 – base cover 12" with 2" NPSM thread for mounting on a flat surface 
• 002 663 - 12" base cover with 2" NPSM thread for mounting on 12" base

• dimensions: 688 × 334 × 290 mm
• weight: 11,5 kg
• optical height: 490 mm vertical adjustment: 0-20 °/ 1°
• horizontal adjustment: 0-360°
• surface: natural aluminum / RAL1021 / RAL9005

Connectisn and power supply:

• without MONITORING function, one power cable with FAA AC5345-26, L-82
• with MONITORING function, one power supply
• combination cable with five-pin connector
• current isolating transformer 45-150 W (not included)